Publicaciones

2015-12
Topology Optimization of Aerospace Parts for Additive Manufacturing
Published in: Proceedings AMPT 2015 Conference, 14-17 December, Madrid, Spain, 2015.
Written by: BERROCAL L., FERNÁNDEZ R., GONZÁLEZ S., PERIÑÁN A., VILANOVA J. MARTIN J.M., GUERRERO J., LASAGNI F.
2015-12
Polyamide properties improvement through additivation with Graphite Nanoplatelets for Selective Laser Melting
Published in: Proceedings AMPT 2015 Conference, 14-17 December, Madrid, Spain, 2015.
Written by: RELINQUE J.J., GARCIA ROMERO M.G., NAVAS J., SALES D.L., NAVAS F.J., MORALES CID G., AGUILERA D., PERIÑÁN A., LASAGNI F., MOLINA S.I.
2015-12
Getting Confidence for Flying Additive Manufactured Hardware
Published in: Proceedings AMPT 2015 Conference, 14-17 December, Madrid, Spain, 2015.
Written by: LASAGNI F., VILANOVA J., GÓMEZ-MOLINERO V.
2015-12
Lattice Structures for AM Topology Optimization
Published in: Proceedings AMPT 2015 Conference, 14-17 December, Madrid, Spain, 2015.
Written by: BERROCAL L., FERNÁNDEZ R., GONZÁLEZ S., PERIÑÁN A., TUDELA S., LASAGNI F.
2015-11
On-line Damage Monitoring and Evaluation in CFRP Aerospace Structures during Mechanical Testing
Published in: Proceedings 7th International Symposium on NDT in Aerospace, 16-18 November, Bremen, Germany, 2015.
Written by: LASAGNI F., RODRIGUEZ B., SANTAMARIA M.L., GALLEGUILLOS C., HERNÁNDEZ S. CUEVAS E.
2015-11
Laser Ultrasonics Inspections of Aeronautical Components Validated by Computed Tomography
Published in: Proceedings 7th International Symposium on NDT in Aerospace, 16-18 November, Bremen, Germany, 2015.
Written by: CUEVAS AGUADO E., GALLEGUILLOS C., GARCÍA RAMOS C., LASAGNI F.
2015-09
AM Technology for Primary and Secundary Structures in Launcher Applications
Published in: Werkstoffwoche 2015, 14-17 September, Dresden, Germany, 2015.
Written by: LASAGNI F., PERIÑÁN A., VILANOVA J., ZORRILLA A.
2015-05
Wireless Inspection System: WiiPA
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: M. García, J. Vázquez, M. Toral, F. Lasagni, M.L. Santamaría, F. Alarcón, A. Viguria
2015-05
Non-Destructive and Contactless Evaluation of Sandwich Structure using Laser Shearography
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: C. Galleguillos, P. Ruiz, E. Garcia, D. Jiménez, P. Arroyo , F. Lasagni
2015-05
Automated Inspection of CFRP radii using ultrasonics PA
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: M.L. Santamaría, A. Morán, R. Marín, P. Íñigo, F. Lasagni, C. Pérez
2015-05
Porosity Determination in Metallic Parts by Computed Tomography
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: E.M. Pérez Soriano, J.M. Gallardo, F. Lasagni
2015-05
On the Inspectionability of Additive Manufactured Parts
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: C. Galleguillos, A. Periñan, J. Vilanova, F. Lasagni
2015-05
Computed Tomography: Imagen Modification for Reduction of Inspection Noise in Metallic Parts
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: N. Gutiérrez, E. de la Peña, C. Galleguillos, A. Zorrilla, F. Lasagni
2015-05
Characterizaton of Void Content in CFRP Parts
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: P. Arroyo, E. García, P. Ruíz, F. Lasagni
2015-05
Structural Monitoring of Wing from Unmanned Aerial System using FBG sensors
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: N. Gutiérrez, J. Gutiérrez, R. Fernández, F. Lasagni
2015-05
Detection and quantification of Foam Stacks in CFRP Aeronautic Parts by Computed Tomography
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: C. Galleguillos, M.L. Santamaría, J. Guerrero, L. Rubio, F. Lasagni
2015-05
Automated Defect Detection in Composite Structures by Infrared Thermography
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: N. Gutiérrez, A. Zorrilla, E. Moreno, B. Rodriguez, C. Alejo, A. Jiménez, A. Viguria, F. Lasagni
2015-05
Damage Monitoring in Aerostructures during Mechanical Testing using NDT Methods
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: B. Rodríguez, M.L. Santamaría, C. Galleguillos, S. Hernández, E. Cuevas, F. Lasagni
2015-05
Leak Detection on Hydraulic and Neumatic Systems using Thermography and CO2
Published in: 13º Congreso Nacional de Ensayos No Destructivos, May. 6-7, 2015
Written by: B. Rodríguez, M.L. Santamaría, C. Galleguillos, A. Bollo,F. Lozano, L. Girela, F. Lasagni
2015-01
Review: Los ensayos No Destructivos en el CATEC para el Sector Aeroespacial (I)
Published in: Journal of the Spanish Association for NDT (AEND), 71, 2015, 28-38.
Written by: LASAGNI F., GUTIERREZ N., SANTAMARIA M.L., GALLEGUILLOS C., FERNÁNDEZ R., RODRÍGUEZ B.